Monday, September 11, 2017

VHDL Testbench using Oscilloscope Waveforms

I got a little tired of writing a generator for synthetic data in a VHDL testbench, so I thought, maybe just use an oscilloscope trace with real-workd data for this purpose.

So, here's the VHDL code, I've only captured one channel and it's stored as unsigned 8-bit characters, so everything is very easy.



signal aes3_in : std_logic;
signal aes3_analog : natural;
type t_stim_file is file of character;
data_in: process
   -- waveform captured on a rigol oscilloscope, 1ch, 8bit, 1GS/s
   file stim_file : t_stim_file open read_mode is "aes_48khz_24bit.wfm";
   variable v : character;
   variable n : natural range 0 to 255;
begin
   -- skip over the first 3300 bytes, header of the wfm file
   for i in 0 to 3300 loop
      read(stim_file, v);
   end loop;
   while not endfile(stim_file) loop
      read(stim_file, v);
      n := character'pos(v);
      aes3_analog <= n;
      aes3_in <= '1' when n > 90 else '0';
      wait for 1 ns; -- 1GHz sampling rate
   end loop;
   assert false report "end of test" severity failure; -- end testbench here
end process;



No comments: